Temperature effects on the 15-85-micron spectra of olivines and pyroxenes

Far-infrared spectra of laboratory silicates are normally obtained at room temperature even though the grains responsible for astronomical silicate emission bands seen at wavelengths >20 micron are likely to be at temperatures below ~150 K. In order to investigate the effect of temperature on silicate spectra, we have obtained absorption spectra of powdered forsterite and olivine, along with two orthoenstatites and diopside clinopyroxene, at 3.5+-0.5 K and at room temperature (295+-2K). To determine the changes in the spectra the resolution must be increased from 1 to 0.25 cm^-1 at both temperatures since a reduction in temperature reduces the phonon density, thereby reducing the width of the infrared peaks. Several bands observed at 295 K split at 3.5 K. At 3.5 K the widths of isolated single bands in olivine, enstatites and diopside are ~ 90% of their 295 K-widths. However, in forsterite the 3.5-K-widths of the 31-, 49- and 69-micron bands are, respectively, 90%, 45% and 31% of their 295 K widths. Due to an increase in phonon energy as the lattice contracts, 3.5-K-singlet peaks occur at shorter wavelengths than do the corresponding 295-K peaks; the magnitude of the wavelength shift increases from \~ 0-0.2 micron at 25 micron to ~0.9 micron at 80 micron. Changes in the relative absorbances of spectral peaks are also observed. The temperature dependence of lambda_pk and bandwidth shows promise as a means to deduce characteristic temperatures of mineralogically distinct grain populations. In addition, the observed changes in band strength with temperature will affect estimates of grain masses and relative mineral abundances inferred using room-temperature laboratory data.Comment: 11 pages, 7 figures including figures 3a and 3b. includes latex and eps files. Accepted by MNRAS on 15th March 200

Resolving Architectural Mismatches of COTS Through Architectural Reconciliation

The integration of COTS components into a system under development entails architectural mismatches. These have been tackled, so far, at the component level, through component adaptation techniques, but they also must be tackled at an architectural level of abstraction. In this paper we propose an approach for resolving architectural mismatches, with the aid of architectural reconciliation. The approach consists of designing and subsequently reconciling two architectural models, one that is forward-engineered from the requirements and another that is reverse-engineered from the COTS-based implementation. The final reconciled model is optimally adapted both to the requirements and to the actual COTS-based implementation. The contribution of this paper lies in the application of architectural reconciliation in the context of COTS-based software development. Architectural modeling is based upon the UML 2.0 standard, while the reconciliation is performed by transforming the two models, with the help of architectural design decisions.

Outbursts from IGR J17473-2721

We have investigated the outbursts of IGR J17473-2721. We analyzed all available observations carried out by RXTE on IGR J17473-2721 during its later outburst and as well all the available SWIFT/BAT data. The flux of the latter outburst rose in ~ one month and then kept roughly constant for the following ~ two months. During this time period, the source was in a low/hard state. The source moved to a high/soft state within the following three days, accompanied by the occurrence of an additional outburst at soft X-rays and the end of the preceding outburst in hard X-rays. During the decay of this soft outburst, the source went back to a low/hard state within 6 days, with a luminosity 4 times lower than the first transition. This shows a full cycle of the hysteresis in transition between the hard and the soft states. The fact that the flux remained roughly constant for ~ two months at times prior to the spectral transition to a high/soft state might be regarded as the result of balancing the evaporation of the inner disk and the inward accretion flow, in a model in which the state transition is determined by the mass flow rate. Such a balance might be broken via an additional mass flow accreting onto the inner disk, which lightens the extra soft outburst and causes the state transition. However, the possibility of an origin of the emission from the jet during this time period cannot be excluded. The spectral analysis suggests an inclined XRB system for IGR J17473-2721. Such a long-lived preceding low/hard state makes IGR J17473-2721 resemble the behavior of outbursts seen in black hole X-ray binaries like GX 339-4.Comment: A&A in pres

Prognostic health monitoring in switch-mode power supplies with voltage regulation

The system includes a current injection device in electrical communication with the switch mode power supply. The current injection device is positioned to alter the initial, non-zero load current when activated. A prognostic control is in communication with the current injection device, controlling activation of the current injection device. A frequency detector is positioned to receive an output signal from the switch mode power supply and is able to count cycles in a sinusoidal wave within the output signal. An output device is in communication with the frequency detector. The output device outputs a result of the counted cycles, which are indicative of damage to an a remaining useful life of the switch mode power supply

Switching the Conductance of a Molecular Junction using a Proton Transfer Reaction

A novel mechanism for switching a molecular junction based on a proton transfer reaction triggered by an external electrostatic field is proposed. As a specific example to demonstrate the feasibility of the mechanism, the tautomers [2,5-(4-hydroxypyridine)] and {2,5-[4(1H)-pyridone]} are considered. Employing a combination of first-principles electronic structure calculations and Landauer transport theory, we show that both tautomers exhibit very different conductance properties and realize the "on" and "off" states of a molecular switch. Moreover, we provide a proof of principle that both forms can be reversibly converted into each other using an external electrostatic field.Comment: 14 pages, 5 figure

Six supersoft X-ray binaries: system parameters and twin-jet outflows

A comparison is made between the properties of CAL 83, CAL 87, RX J0513.9-6951, 1E 0035.4-7230 (SMC 13), RX J0019.8+2156, and RX J0925.7-4758, all supersoft X-ray binaries. Spectra with the same resolution and wavelength coverage of these systems are compared and contrasted. Some new photometry is also presented. The equivalent widths of the principal emission lines of H and He II differ by more than an order of magnitude among these sources, although those of the highest ionization lines (e.g. O VI) are very similar. In individual systems, the velocity curves derived from various ions often differ in phasing and amplitude, but those whose phasing is consistent with the light curves (implying the lines are formed near the compact star) give masses of $\sim 1.2M_{\odot}$ and $\sim 0.5M_{\odot}$ for the degenerate and mass-losing stars, respectively. This finding is in conflict with currently prevailing theoretical models for supersoft binaries. The three highest luminosity sources show evidence of "jet" outflows, with velocities of $\sim 1-4 \times10^3 km/s$. In CAL 83 the shape of the He II 4686\AA profile continues to show evidence that these jets may precess with a period of $\sim 69$ days.Comment: 27 pages including 5 tables, plus 6 figures. To appear in Ap

Weak Disorder in Fibonacci Sequences

We study how weak disorder affects the growth of the Fibonacci series. We introduce a family of stochastic sequences that grow by the normal Fibonacci recursion with probability 1-epsilon, but follow a different recursion rule with a small probability epsilon. We focus on the weak disorder limit and obtain the Lyapunov exponent, that characterizes the typical growth of the sequence elements, using perturbation theory. The limiting distribution for the ratio of consecutive sequence elements is obtained as well. A number of variations to the basic Fibonacci recursion including shift, doubling, and copying are considered.Comment: 4 pages, 2 figure

Two-temperature coronal flow above a thin disk

We extended the disk corona model (Meyer & Meyer-Hofmeister 1994; Meyer, Liu, & Meyer-Hofmeister 2000a) to the inner region of galactic nuclei by including different temperatures in ions and electrons as well as Compton cooling. We found that the mass evaporation rate and hence the fraction of accretion energy released in the corona depend strongly on the rate of incoming mass flow from outer edge of the disk, a larger rate leading to more Compton cooling, less efficient evaporation and a weaker corona. We also found a strong dependence on the viscosity, higher viscosity leading to an enhanced mass flow in the corona and therefore more evaporation of gas from the disk below. If we take accretion rates in units of the Eddington rate our results become independent on the mass of the central black hole. The model predicts weaker contributions to the hard X-rays for objects with higher accretion rate like narrow-line Seyfert 1 galaxies (NLS1s), in agreement with observations. For luminous active galactic nuclei (AGN) strong Compton cooling in the innermost corona is so efficient that a large amount of additional heating is required to maintain the corona above the thin disk.Comment: 17 pages, 6 figures. ApJ accepte

The Flow Of Granular Matter Under Reduced-Gravity Conditions

To gain a better understanding of the surfaces of planets and small bodies in the solar system, the flow behavior of granular material for various gravity levels is of utmost interest. We performed a set of reduced-gravity measurements to analyze the flow behavior of granular matter with a quasi-2D hourglass under coarse-vacuum conditions and with a tilting avalanche box. We used the Bremen drop tower and a small centrifuge to achieve residual-gravity levels between 0.01 g and 0.3 g. Both experiments were carried out with basalt and glass grains as well as with two kinds of ordinary sand. For the hourglass experiments, the volume flow through the orifice, the repose and friction angles, and the flow behavior of the particles close to the surface were determined. In the avalanche-box experiment, we measured the duration of the avalanche, the maximum slope angle as well as the width of the avalanche as a function of the gravity level.Comment: Accepted by "Proc. Powders and Grains 2009", Publisher AI

Detectability of dirty dust grains in brown dwarf atmospheres

Dust clouds influence the atmospheric structure of brown dwarfs, and they affect the heat transfer and change the gas-phase chemistry. However, the physics of their formation and evolution is not well understood. In this letter, we predict dust signatures and propose a potential observational test of the physics of dust formation in brown dwarf atmosphere based on the spectral features of the different solid components predicted by dust formation theory. A momentum method for the formation of dirty dust grains (nucleation, growth, evaporation, drift) is used in application to a static brown dwarf atmosphere structure to compute the dust grain properties, in particular the heterogeneous grain composition and the grain size. Effective medium and Mie theory are used to compute the extinction of these spherical grains. Dust formation results in grains whose composition differs from that of grains formed at equilibrium. Our kinetic model predicts that solid amorphous SiO2[s] (silica) is one of the most abundant solid component followed by amorphous MgSiO4[s] and MgSiO3[s], while SiO2[s] is absent in equilibrium models because it is a metastable solid. Solid amorphous SiO2[s] possesses a strong broad absorption feature centered at 8.7mum, while amorphous Mg2SiO4[s]/MgSiO3[s] absorb at 9.7mum beside other absorption features at longer wavelength. Those features at lambda < 15mum are detectable in absorption if grains are small (radius < 0.2mum) in the upper atmosphere as suggested by our model. We suggest that the detection of a feature at 8.7mum in deep infrared spectra could provide evidence for non-equilibrium dust formation that yields grains composed of metastable solids in brown dwarf atmospheres. This feature will shift towards 10mum and broaden if silicates (e.g. fosterite) are much more abundant.Comment: A&A Letter, accepte